All AAI floor plates have chrome plated finish, and are
installed flush with the top of the floor. They must be used
with eye screw attachments. Be sure to specify the type of floor
when ordering floor plates, which are additional in cost to the
equipment.
422-110 Style A
• Installed only in securely anchored wood floors
• Features replaceable spring-loaded pop-up cap
• Not to be used with any cabled apparatus
422-111 Style B
• Installed only in securely anchored wood floors over
concrete
• Features replaceable spring-loaded pop-up cap
• Includes anchoring cement
422-211 Style BX
Same features as the Style B plate, except the knurled
anchor is extended to 3-1/4" (81mm) in length
422-112 Style C
• Installed in concrete and vinyl covered concrete floors
• Features replaceable spring-loaded pop-up cap
• Includes anchoring cement
422-013 Style D
• Installed only in wood floors where the horizontal bar
must be anchored
• Features unthreaded hole to prevent shifting of horizontal bar
post
422-014 Style E
• Installed in floating wood floors resting on sleepers or
metal clip fasteners
• Features removable cover cap and anchoring cement
• Use when distance from top of the floor to bottom of sleepers
is 2-7/8" (72mm) or less
422-029 Style E, 2-7/8" to 4" (72 to 102mm)
422-030 Style E, 2-7/8" to 5" (72 to 127mm)
422-031 Style E, 2-7/8" to 6" (72 to 152mm)
422-032 Style E, 2-7/8" to 7" (72 to 178mm)
422-034 Style E, 2-7/8" to 9" (72 to 229mm)
19510 Eye Screw
Not included with floor plates, must be purchased separately.
